Body protection against gravel is one of the most popular services at present both in Europe and in our company. The protective film protects against various accidental stones, gravel and protects against scratches. This allows you to keep the car’s paint intact for many years to come.
The protective polyurethane film is exposed to various loads: sand, insects, gravel and debris. These factors scratch and damage the appearance of the car from scratches, so it is appropriate to protect it from harm. Such protection adds more value to the car making it look new.
Morendi is an official certified GSWF partner and has the right to install anti-gravel films. Today, SunTek anti-gravel film is a leader in paint protection. According to its properties, the thickness of the film is 180-200 microns, which is equivalent to double painting thickness of a modern car.
It is important that SunTek film does not turn yellow, deform or fade over time. The colour of the car will be bright and rich throughout the life of the film as if it were newly coated.
However, the most important advantage of the protective film is spontaneous “healing”! Various scratches disappear when exposed to temperature or hot water.
We have many years of experience in working with plywood. It is important to note that when gluing, we dismantle the car in order to reach and tighten the most critical places.
This is a glass with an adjustable dimming function that allows you to tint the machine at any time. At the same time, repeating the exact geometry of your regular glasses. As raw materials, glass of the highest quality Pilkington is used, the glasses are made according to the 3-D matrix of the original glass and are installed instead of your regular glasses. Possibility of regulation of light transmission from 82% to 5%.
A conductive busbar is located along the glass contour. When voltage is applied, the tinting process starts from the edge to the center. Voltage is supplied using a special controller, which is individually programmed for each glass model. Management is possible both with the help of a button (on / off), and with the help of a knob that allows you to set any dimming level, depending on the ambient light.
Glass retains its absolute transparency both on and off. Only light transmission changes. That is, when you press the button, the glass begins to tint, thereby creating the effect of classical tinting. Visibility through the glass is absolute, either through glass with a tinted film, or through sunglasses.
Glasses manufactured by ON GLASS are installed instead of regular glasses in regular places. Modifications to the door structure are not required. Electrochromic glass has similar operating characteristics with standard glasses, a feature is the electrical part that is directly related to glass tinting processes.
During the first 45-60 seconds, about 70% of the glass area is darkened, and during the remaining 30-40 seconds the glass is completely tightened. The process of turning off the glass is carried out similarly.
ElectroToning is a solid triplex protected by an armor plate on both sides. In order to make electric tinting for a specific car, two halves are molded from direct glass and assembled in triplex. At the same time, a space is created between the two glasses, it is it that is filled with a special polymer, which is subsequently polymerized. A conductive busbar is located along the glass contour.